iFixit releases iPhone 4 liberation kit for Pentalobe screws

The good folks at iFixit have noticed that iPhone 4s taken in for service often return without their original Phillips 00 screws. Instead, they're being replaced with Apple's own proprietary Pentalobular screws. These are the same screws that are in the current-generation MacBook Air. Here's a close-up pic from an iPhone 4, courtesy Engadget editor Nilay Patel.

Don't call them Torx screws because they most certainly are not. To get the rare, expensive tool that's meant to extract them, you'll have to be a certified Apple tech (or know one).

While you're meant to use a special driver to extract those screws, you can get them out with something else. That something else is a part of iFixit's "iPhone 4 Liberation Kit," which contains replacement Phillips screws and a driver that will remove Apple's Pentalobular screws, as well as two Phillips replacements. No, it's not the official tool but a low-cost alternative. Note that there's a good chance it will damage the proprietary screws, but you're going to throw them out anyway, right?

Opening an iPhone 4 isn't something that just anyone should do. Be careful and know your limitations. If you're ready, the iPhone 4 liberation kit can be yours for US$9.95.

Check out the video explaining the issue and the kit after the break.

[Via Macgasm] Continue reading iFixit releases iPhone 4 liberation kit for Pentalobe screws

iFixit releases iPhone 4 liberation kit for Pentalobe screws originally appeared on TUAW on Thu, 20 Jan 2011 15:00:00 EST. Please see our terms for use of feeds.

HyperMac offers DIY solutions after Apple lawsuit

HyperMac's portable charging systems are back on the market with a revamped product line that does not violate Apple's patents. HyperMac was faced with a patent lawsuit from Apple over the company's charging cables, which used Apple's MagSafe and 30-pin connectors. The company stopped selling the infringing cables on November 2, while continuing to produce its line of HyperJuice batteries. Without the cables to connect to your laptop, though, the batteries were more or less useless.

Sanho Corporation, the company behind HyperMac, was back at CES 2011 and showed off two new DIY power cable systems that skirt Apple's patents. One system uses Apple's MagSafe Airline adapter and a special plug provided by HyperMac to daisy chain a HyperJuice battery to your Apple laptop. While easy to implement, this setup powers your Apple notebook but does not recharge your battery.

A second solution requires the user to splice the cable on their MacBook power adapter. HyperMac provides the appropriate connectors to let users attach this modified cable to a HyperJuice battery or to the original Apple power adapter. These modifications require minimal technical skill and do not require any soldering. Though not as easy as the Airline adapter method, this latter solution does provide users with the ability to charge their battery from a HyperJuice battery while on the go.